Offshore pipelines installed in moderate to deep water depths (1,500 ft. and beyond) must, by necessity, be designed to withstand ambient external pressure. Improper design can lead to catastrophic collapse of large sections of the structure. During the installation process the line can experience significant bending and tension loads in addition to external pressure. These additional loads can significantly reduce the collapse pressure of the pipe. Special purpose combined loading test facilities were designed and built in which pressures equivalent to 10,000 ft. and beyond were simulated. The...
Offshore pipelines installed in moderate to deep water depths (1,500 ft. and beyond) must, by necessity, be designed to withstand ambient external pressure. Improper design can lead to catastrophic collapse of large sections of the structure. During the installation process the line can experience significant bending and tension loads in addition to external pressure. These additional loads can significantly reduce the collapse pressure of the pipe. Special purpose combined loading test facilities were designed and built in which pressures equivalent to 10,000 ft. and beyond were simulated. The test facilities were used to establish load interaction collapse envelopes for the two types of combined loading mentioned. Bending/pressure collapse envelopes were generated for tubes with diameter to thickness ratios of 34.7, 24.5, 18.2 and 17.3. Tension/pressure collapse envelopes were generated for tubes with diameter to thickness ratios of 38.3, 24.5, 18.2 and 12.2. The geometric imperfections and material parameters were recorded for all test specimen's prior to collapse. Under bending/pressure loading the tube response, the critical collapse loads and the nature of the instabilities observed were found to depend on the loading path. Collapse was found to be relatively insensitive to the history for tension/pressure loading.